Cordierite Ceramic Heating Disc

Product Features and Brief Description Cordierite discs for heater support and insulation layouts. Define the heating-element path, holes, mounting faces and thermal cycle; the ceramic disc is separate from the heat source.

Inquire Now
shx@norkeceramics.com

Product Description
Application
Packaging and Logistics

Product Description A cordierite ceramic heating disc is a shaped ceramic part used within a heater arrangement. This enquiry concerns the support or insulating disc; it does not assume that the ceramic itself is an electrically powered heating element. Show how the separate heating element is positioned on or through the disc. Build the drawing around the element layout Mark the disc diameter and thickness, central opening, fixing holes and any slots or grooves. Include the element or wire dimensions, the intended routing and the areas that must remain clear. Identify the supporting faces and any features used to prevent rotation. Describe heating and cooling conditions Provide the working temperature profile, start-stop cycle, airflow and nearby metal supports. A peak temperature alone leaves important installation conditions undefined. Explain how the disc is restrained and where the assembly allows movement during heating. State the electrical separation required between the element, fasteners and housing. Identify local contact points and any concentrated mechanical loads. Define checks for hole position, seating flatness and visible damage at the edges. Request a disc review Send the part drawing and a sketch or photograph of the heater assembly, along with quantity and any material specification. Read cordierite selection for industrial heaters or send NORKE your heating disc enquiry.
Application Disc geometry: diameter, thickness, central opening, holes, grooves and slots. Assembly: element routing, fastening, electrical separation and airflow. Conditions: temperature profile, thermal cycling and contact loads for review.
Packaging and Logistics Identify vulnerable slot edges and any surfaces that need separation during transport. Confirm pack quantity and part orientation or drawing-revision labels when placing the order.